NigelV
04-11-2008, 10:12 AM
For sale, preferably as a single lot. Check the photos as well. I live near Almonte, but work in Kanata and could probably deliver to anywhere west of downtown Ottawa. Here's the scoop:
-Trainer, complete with OS .46FX motor, radio gear etc. Flies very nicely. Very few hours on the motor. Had a minor crash last time it flew and needs a repair on the elevator. Otherwise good to go. A great starter plane.
-PT-40 glider, with a .074 Norval motor on the nose. I put a small motor on so I could mount a camera under the wing and take aerial photos. I used this plane to take photos of the stetson flyers field. (http://stetsonflyers.com/FLYING%20FIELD.htm) Flies well with or without the motor.
-Blue plane complete with electric motor and gear box. I never flew it. It would probably make a nice park flyer.
-Combat plate, coroplast, with OS .40 motor. Very few hours on the motor. I never actually flew combat with it.
-At-6 Texan, mostly built, with plans. I was planning on making this an electric park flyer, but never quite finished it.
-First radio: Futaba Skysport 4 and a half channel. The skysports are actually 5 channel radios, so I added a button to the top of the radio which triggers the 5th channel from 0 to 100% when pressed. I used the fifth channel to fire the shutter on the camera when I was taking aerial photos.
-Second radio: Futaba Conquest 4 channel. Different channel than the first radio.
-Toolbox on wheels, complete with glow ignitor, fuel pump, and lots of the little bits and pieces you tend to need when flying RC. I also have various bits and pieces of balsa, plans, building hardware like hinges, etc. It alls goes.
I'd like to get around $250 for the whole lot of it. Please call 819-360-2514 this weekend (april 11-12-13) or 613-256-7683 otherwise and ask for Nigel.
Thanks for looking!
Nigel
-Trainer, complete with OS .46FX motor, radio gear etc. Flies very nicely. Very few hours on the motor. Had a minor crash last time it flew and needs a repair on the elevator. Otherwise good to go. A great starter plane.
-PT-40 glider, with a .074 Norval motor on the nose. I put a small motor on so I could mount a camera under the wing and take aerial photos. I used this plane to take photos of the stetson flyers field. (http://stetsonflyers.com/FLYING%20FIELD.htm) Flies well with or without the motor.
-Blue plane complete with electric motor and gear box. I never flew it. It would probably make a nice park flyer.
-Combat plate, coroplast, with OS .40 motor. Very few hours on the motor. I never actually flew combat with it.
-At-6 Texan, mostly built, with plans. I was planning on making this an electric park flyer, but never quite finished it.
-First radio: Futaba Skysport 4 and a half channel. The skysports are actually 5 channel radios, so I added a button to the top of the radio which triggers the 5th channel from 0 to 100% when pressed. I used the fifth channel to fire the shutter on the camera when I was taking aerial photos.
-Second radio: Futaba Conquest 4 channel. Different channel than the first radio.
-Toolbox on wheels, complete with glow ignitor, fuel pump, and lots of the little bits and pieces you tend to need when flying RC. I also have various bits and pieces of balsa, plans, building hardware like hinges, etc. It alls goes.
I'd like to get around $250 for the whole lot of it. Please call 819-360-2514 this weekend (april 11-12-13) or 613-256-7683 otherwise and ask for Nigel.
Thanks for looking!
Nigel